ARGO ATV PART - 10029J - STEERING PIN KIT - AVENGER, FRONTIER, CONQUEST

Description

10029J - K-110 STEERING PIN KIT
Part Number:
10029J
Weight (lbs):
0.2
H.S. Code:
7318.29.00.00
DESCRIPTION
10029J -  K-110 ARGO STEERING PIN KIT
Replacement pin kit for all discontinued styles.  This pin kit is a must upgrade for all models older than 2008.  The old-style steering pins had a very thin male shank that could easily bend or snap off leaving you with no steering on one side of the vehicle.
Install this upgraded pin design used on all 2009 and newer Argo models and eliminate the worry of a broken or bent steering pin that could leave you stranded miles from home.  Always good to carry a spare under the seat for the just-in-case moments.
Fits Argo Atv Models:
All from 1975 - 2019**
** Excluding the XT / XTD or Conquest XT 8x8 Models.  Use part K-111
Sold each.   Order qty (2) to replace both steering pins.
Kit Includes:
(1) 812-17  COLLAR
(1) 112-02  SET SCREW
(1) 117-03  HEX NUT
(1) 812-30  PIN FEMALE
(1) 812-31  PIN MALE
Tech Tip:
When adjusting the pins be sure your brake cable slack is loosened on handlebar steering models and on pull lever steering models be sure your levers are all the way towards the dash.  Adjust the pins so the master cylinder piston is flush with the case of the master cylinder than lock down the set screw on the lock collar and lock nut on all models prior to 2015.   On models 2015 and newer, you will adjust the pin so it touches the master cylinder piston and than go one  1/4 turn for proper adjustment on the Wilwood master cylinder brand.
Replaces: K-110
Additional Images