ARGO ATV PART - K-101 THROTTLE KIT - FNTR / CONQST / AVENGER / HDI (1999 - 2019)

Description

K-101 THROTTLE KIT - FRONTIER / CONQUEST / AVENGER / HDI
Replacement throttle twist, rubber grip, and throttle cable all in one kit.
The 612-101 cable is the new revised and improved version for better strength and durability that replaces the 612-116 design.
Not compatible with the 2019 Aurora or any 2020 or newer model with the finger pull throttle lever.
Kit Includes:
(1) 612-101 Throttle Cable
(1) 127-81 Throttle Tube
(1) 10507C - Left grip
(1) 10508C  Right Grip - Installed on throttle twist
Fits Models / Years*:
Avenger 8x8 LX, S, ST, STR, STX
Avenger 700 8x8 (2004 - 2019)
Avenger 750 EFI 8x8  (2007 -2019)
Avenger 800 8x8 (2018 -2019)
Bigfoot 6x6 (See below)
Bigfoot MX6 (2019)
Bigfoot MX8 (2019
Conquest 8x8 (Non XT - See below)
Frontier 480/580/650 6x6 (2007 - 2019)
Frontier 650 8x8 (2007 - 2019)
Frontier 6x6 (2007 - 2019)
Frontier 6x6 ST (2007 - 2018)
Frontier 8x8 (2007 - 2019)
HD 650 6x6 (2007 - 2015)
HD 700 8x8  (2015 and Newer)
HDI 750 6x6
HDI SE 8x8  (2015 and Newer)
HDI 750 EFI 8x8  (2015 and Newer)
HuntMaster 8x8 (2015 - 2019)
Response 8x8 (See below)
Scout 6x6 (2015 -2019)
Scout 6x6 (2015 -2019)
Vanguard II 6x6 (See below)
Vanguard 6x6  ( See below)
Check your manual or read below for fitment on discontinued models above.
Tech Tip:
Before placing the cable ball end in the throttle twist add a dab of grease to prevent the metal ball from wearing into the plastic over time causing failure.
Avenger 750 & 700 / HDI 750 / HD 700
Original throttle cable 612-116 is discontinued. use cable 612-101 or order kit k-101
Fits all Avenger 700, Avenger 750 EFI, HD 700 and HDI 750 8X8. HDI SE from years 204-2014. Production on the 2015 models was switched to the 612-101 cable.
Bigfoot 6x6 1997-1999
The stock throttle cable was a 612-76. This cable is replaced by ordering a 612-101 and new throttle twist grip 127-81. The 612-76 cable is no longer available. Slight modification may be needed to get the throttle cable to fit on the throttle plate.
Bigfoot 6x6 2000-2006
The stock cable is a 612-101 for use with throttle tube 127-81.
Conquest 8x8 1994-1996
Stock throttle cable 612-90 is replaced by throttle cable 812-28. Also requires parts 125-88 and 127-52 upgrade for the 812-28 to fit. You will use the stock 100-57 chrome throttle twist grip to install these parts. Visit part 812-28 for modification instructions. If you need to replace the throttle twist grip the new style 612-101 throttle cable and 127-81 throttle twist grip can be used, however you will need to jury rig it to work as the cable and mounting is different. If you order a 612-101 and 127-81 you do not need cable 812-28. If you can save your stock chrome throttle twist grip do so, so you don't have to jury rig the newer version cable/throttle twist grip on your vehicle.
Conquest 8x8 1997
812-28 is the stock cable for the above year. No modifications are required as long as you are using the stock 100-57 chrome throttle twist grip. If you need to replace the throttle cable and throttle twist grip can be used however you will need to jury rig it to work as the cable and mounting is different. The 100-57 chrome throttle twist grips are no longer available. Do your best to save the chrome throttle twist grip so you don't have to modify the throttle system.
Conquest 8x8 1998-1999
To replace throttle cable 612-76 you will need to order throttle cable 612-101 and new throttle twist grip 127-81. These parts are currently available and will bolt with little modifications needed.
Conquest 8x8 / 6x6 2000-2007
The above years use throttle cable 612-101 and plastic throttle twist grip 127-81. Both items are currently available and are direct replacements for the stock cable and throttle twist grip mounted on the above years.
Response 8x8 1995-1999
To replace throttle cable 612-93 you will need to upgrade to throttle 612-101 and throttle twist grip 127-81. The 612-101 throttle cable will  not work with the stock 100-57 chrome throttle twist grip found on the response. Throttle cable 612-93 is no longer available.
Response 8x8 2000-2006
The stock throttle cable is a 612-101 and throttle twist grip is a 127-81.
Vanguard & Vanguard II 6x6 1992-1995
The stock throttle cable 612-89 is replaced with throttle cable 612-77. For use only with the stock 100-57 chrome throttle twist grip. Will not fir the new 127-81 plastic throttle twist grip. If you need to replace the throttle twist grip and cable you can order 612-101 and 127-81 and jury rig.
Vanguard & Vanguard II 6x6 1996-1999
The stock cable is a 612-77 for use only with chrome 100-57 throttle twist grip. Will not fit the new 127-81 plastic throttle twist grip. If you need to replace the throttle twist grip and cable you can order 612-101 and 127-81 and jury rig.
Vanguard & Vanguard II 6x6 2000-2006
The stock throttle cable is a 612-101 and throttle twist grip is a 127-81.