GE Security / Interlogix S732DVT-EST1 MM Digital Video 2-Way MPD Data TX

Description

GE General Electric Interlogix - Digital Fiber Optic 2-Way Video MM, CAN, HPD Data Transmitter (Standalone)
Model: S732DVT-EST1
New old stock surplus, Surplus job stock, In the original box with the instruction sheet only, No additional hardware or accessories.
This box was previously opened, however the unit was not used.  This auction is for the exact unit seen in the above photos.
The
General Electric S732DV 1-Channel Fiber Optic Video / Data Transmitter (Standalone)
supports one-way transmission of video and two-way transmission of multiprotocol data over a single fiber. Moreover, it supports multimode operation. The transmitter supports resolutions of up to 520 TVL, and features Optical Automatic Gain Control (OAGC) that helps compensate for loss in signal strength. It has an operating distance of 4.0 miles (6.5 km).
With 6.5 MHz of video bandwidth and 8-bit video processing, the transmitter ensures clean, noise-free video to the receiver. Data translation allows data to be easily converted from one format to another, while data formats selected during installation can be changed in the field via a rotary switch.
Support for major video formats means that the transmitter can be retained even if the video control system is changed. You can easily monitor the operating status of the system using SMARTS diagnostic technology, which comes with several built-in diagnostic tools including LEDs and a video test pattern generator. The transmitter comes in a standalone configuration and features a polycarbonate construction.
Supports one-way transmission of video and two-way transmission of multiprotocol data over a single fiber
Supports multimode operation
Supports resolutions of up to 520 TVL
Optical Automatic Gain Control (OAGC) helps compensate for loss in signal strength
Operating distance - 4.0 miles (6.5 km)
Video bandwidth of 6.5 MHz and 8-bit video processing help ensure clean and noise-free video at the receiver
Data translation feature allows data to be converted from one format to another
Data formats are selected during installation and can be changed in the field via a rotary switch
Supports major video formats
You can easily monitor the operating status of the system using SMARTS diagnostic technology, which comes with several built-in diagnostic tools including LEDs and a video test pattern generator
Standalone configuration
Polycarbonate construction
Interlogix S732DVT-EST1 Specs
Video
Channels
1 simplex
Format
NTSC and PAL
I/O
1.0 V pk - pk
Bandwidth
6.5 MHz
SNR
>55 dB
Video Resolution
520 TVL
I/O Impedance
75 ohms
Differential Phase
<3°
Differential Gain
<3%
Data
Channels
1 duplex
Formats
RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire/4-wire), Manchester, Biphase, SensorNet, DTMF control
Baud Rate
250 to 512 kbps or 15 kHz (depending on data format)
Bit Error Rate
<1.0E-9
Optical
Mode
Multimode
Optical Budget
13 dB
Emitter Outputs
LED or Laser
Wavelength
850 nm and/or 1300 nm
Operating Distance
Up to 4.0 miles (6.5 km)
Gain Control
Optical Automatic Gain Control (OAGC)
Launch Power(dBm)
-15
Electrical
Input Power
24 VAC or 13.5 VDC regulated
Current Requirements
450 mA
Power Consumption
6 W
Protection
Solid-state short circuit protection
Environmental
Operating Temperature
-40 to 167°F (-40 to 75°C)
Humidity
95% relative, noncondensing (maximum)
Mechanical
Construction
Polycarbonate
Weight
1.2 lb (0.54 kg)
Dimensions
5.0 x 4.8 x 1.5" (127 x 122 x 38 mm)