Ingersoll Rand DD-138HF

Description

550 hours 2005 Ingersoll Rand DD-138HF Well maintained!
Year 2005
Manufacturer INGERSOLL-RAND
Model DD138HF
MODEL DD-138HF
MACHINE WEIGHTS W/ ROPS / FOPS
Operating Weight (CECE) – lb (kg) 30,325 (13752)
Weight @ Front Drum – lb (kg) 15,880 (7202)
Weight @ Rear Drum – lb (kg) 14,445 (6551)
Shipping Weight – lb (kg) 28,728 (13028)
MACHINE DIMENSIONS
Length – in (mm) 236 (5995)
Width – in (mm) 92 (2337)
Height — Top Of Steering Wheel – in (mm) 93.8 (2382)
Height — Top Of ROPS / FOPS – in (mm) 125.2 (3179)
Drum Base – in (mm) 139.8 (3550)
Curb Clearance – in (mm) 20 (509)
Inside Turning Radius (to drum edge) – in (mm) 179.6 (4562)
DRUM
Width – in (mm) 84 (2135)
Diameter – in (mm) 55.1 (1400)
Shell Thickness (nominal) – in (mm) 0.78 (20)
Finish Machined surface; chamfered & radiused edges
VIBRATION
Frequency – vpm (Hz) 3,200 (53.3)
Nominal Amplitude – in (mm) High 0.025 (0.63)
Low 0.013 (0.33)
Centrifugal Force – lb (kN) High 42,260 (188)
Low 21,840 (97.1)
PROPULSION
Type Closed-loop hydrostatic, parallel circuit to both drums
Drum Drive Heavy-duty radial piston LSHT motors; 2-speed rear motor
Travel Speed – mph (km/h) High 0 – 6.6 (0 – 10.6)
Low 0 – 5 (0 – 8)
ENGINE
Make / Model Cummins B5.9-TAA
Engine Type Turbocharged & charge air-cooled 6-cylinder
Rated Power @ 2,200 rpm – hp (kW) 173 (129)
Electrical 12 V DC, negative ground; 95 A alternator
BRAKES
Service Dynamic hydrostatic through propulsion system
Parking / Secondary SAHR on front-drum & rear-drum drive motors
WATER SYSTEM
Type Pressure spray drum wetting system with LDPE water tanks
Pumps Diaphragm water pumps, primary & secondary for each drum
Spray Bars Primary & secondary spray bars for each drum
Nozzles Hand-serviceable fan spray nozzles; 12 per spray bar
Filtration Sock strainer each tank; primary water filter each pump, fine filter each nozzle
Drum Wipers Front & rear rubber wipers for each drum
Water Tank Capacity – gal (L) 328 (1241)