-40%
Set of 4 used Sanyo Color CCD camera model VCC-6574A w/ lenses
$ 65.99
- Description
- Size Guide
Description
Minimum Performance SpecificationsSpecifications
MODEL
VCC-6574
Scanning System
NTSC Standard 525 lines, 30 frames/Sec: 2:1 Interlace
Image Device
Interline Transfer CCD
Image Size
1/3: (Appox. 4.8mm x 3.6mm)
Picture Element
811 x 508 (V) picture elements
768 (H) x 494 (V) effective picture elements
Unit (pixel) cell size
6.35 (H) x 7.4 (V) um
Geometry
No Geometric Distortion
Synchronizing System
Internal/Line Lock Synchronization
Interlace
PLL 2:1 Interlace
Resolution
Horizontal 520TV lines
Vertical 350TV lines
Video Output Level
1.0 Vp-p @ 75 ohms composite
Video S/N Ratio
More
than 48d
B
Minimum illumination
0.9 lux @ F1.2
(incandescent lighting)
Gamma correction
0.45
Gain Control (AGC)
Automatic
White Balance
ATW/Manual
Backlight Compensation
ON/OFF, Manual Switching, 2 Mode Setting: Center Zone Light
Measuring & Multi Zone Light Measuring
Lens Mount
CS Mount
Flange Back Adjustment
12.5
mm
+
0.5mm
Camera Mount
1/4" 20 UNC (top/bottom selectable)
Auto Iris Lens AI LENS:DC/VIDEO Slide Sw. (Side)
Electronic Iris/Auto Iris EI/AI Slide Sw. (Side)
Controls
Aperture Compensation APER:SHRP/NORM Slide Sw. (Side)
Backlight Compensation BLC: ON/OFF Slide Sw. (Slide)
Internal/Line Lock Sync: INT/L-L Slide Sw. (Slide)
White Balance ATW & Manual Slide Sw. (Slide)
Video VIDEO OUT BNC (Rear)
Sockets
Auto Iris Lens LENS OUT 4-pin (Side)
Power Supply 24V AC, GND 3-pin term. (Rear)
Electronic Iris Range
ON/OFF 1/60 - 1/100,000 Sec
Environmental Conditions
Operating: Temperature -10 degree C to +50 degree C
Humidity: Within 90% RH
Storage: Temperature -20 degree C to +70 degree C
Humidity: Within 70% RH
Power Indicator
LED
Power Requirement
24V AC, 60Hz
Power Consumption
Approx. 3.7 W (with AI, lens)
Approx. 2.9 W (without AI, lens)
Dimensions (W x H x D)
2.2 x 1.8 x 3.9 inches (56 x 45 x 99.5mm)
(Without lens mount and camera mount)
Weight
Approx. 310g (without lens)